Re: New install of GNU Radio executes old version

https://wiki.gnuradio.org/index.php?title=InstallingGR
says:
For Raspberry Pi OS64-bit ≥2021-10-30 the actual version of gnuradio is
v3.10.5.1.

Why can't you use this?
> Chris,
>
> I did what you suggested.
>
> I then ran cmake as before. The result was the same except that the
> following were added to the gnuradio enabled components:
>
> python-support
> libad9361
>
> I'm considering giving up on this. I'm consuming a lot of your time and
> this is a personal project only. I really appreciate the effort you have
> put into this.
>
> I wanted to upgrade in order to add a component to my project that
> requires 3.10.
>
> I wouldn't be upset if you want to pull the plug on this.
>
> Jim
>
> -----Original Message----- From: Chris Gorman
> Sent: Monday, October 7, 2024 9:22 AM
> To: Barry Jackson
> Cc: discuss-gnuradio@gnu.org
> Subject: Re: New install of GNU Radio executes old version
>
> Hello Jim,
>
> As Barry said you're missing lots of devel packages.  I assume based
> on your python version that you're using Raspbian Bullseye as your OS.
> If that's the case, there is a list of packages that you'll need to
> install to build gnuradio.  I would try the list of packages
> recommended on https://wiki.gnuradio.org/index.php?title=UbuntuInstall
> .
>
> Basically,
>
> sudo apt install git cmake g++ libboost-all-dev libgmp-dev python3-numpy \
> python3-mako python3-sphinx python3-lxml doxygen libfftw3-dev \
> libsdl1.2-dev libgsl-dev libqwt-qt5-dev libqt5opengl5-dev python3-pyqt5 \
> liblog4cpp5-dev libzmq3-dev python3-yaml python3-click python3-click-
> plugins \
> python3-zmq python3-scipy python3-gi python3-gi-cairo gir1.2-gtk-3.0 \
> libcodec2-dev libgsm1-dev libusb-1.0-0 libusb-1.0-0-dev libudev-dev
> python3-setuptools
>
> sudo apt install pybind11-dev python3-matplotlib libsndfile1-dev \
> libsoapysdr-dev soapysdr-tools python3-pygccxml python3-pyqtgraph
>
> and
>
> sudo apt install libiio-dev libad9361-dev libspdlog-dev
> python3-packaging python3-jsonschema python3-qtpy
>
> Once you get those installed, you'll need to rebuild gnuradio.  You're
> looking for a list of gnuradio enabled components after running cmake
> similar to the one I sent you.
>
> Hope this helps.
>
> Chris
>
> On Mon, Oct 7, 2024 at 4:21 AM Barry Jackson <zen25000@zen.co.uk> wrote:
>>
>> On 07/10/2024 01:11, Elmore Family wrote:
>> > Chris,
>> >
>> > Here is what I have after cmake:
>> >
>> > -- ######################################################
>> > -- # Gnuradio enabled components
>> > -- ######################################################
>> > --   * testing-support
>> > --   * post-install
>> > --   * doxygen
>> > --   * man-pages
>>
>> You are missing lots of -devel packages for all those disabled missing
>> components.
>>
>> As a guide look at the BuildRequires in our (Mageia) gnuradio.spec they
>> start at line 75:
>>
>> http://svnweb.mageia.org/packages/cauldron/gnuradio/current/SPECS/
>> gnuradio.spec?revision=2102453&view=markup
>>
>>
>>
>>
>>
>>
>
>