Re: New install of GNU Radio executes old version

Chris, et al,

The install failed with 2 errors at qtgui.

This is a nightmare.

Jim

-----Original Message-----
From: Chris Gorman
Sent: Tuesday, October 8, 2024 8:08 AM
To: Volker Schroer
Cc: discuss-gnuradio@gnu.org
Subject: Re: New install of GNU Radio executes old version

Hi Jim,

Your call on what to do about this. If it were me, I'd probably try
what Volker is suggesting and use the prebuilt binary. That said, if
you want to try to get gnuradio built on your pi, I'll try to help.
Unfortunately, I'm kind of confused about your results. You should
have more than just python-support and libad9361 if all the
dependencies were installed.

If you want to continue. Run the following and attach the build.log
file produced to your next email. (It's the build command followed by
stdio and stderr redirection to a file.)

cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=Release
--DPYTHON_EXECUTABLE=/usr/bin/python3 ../ > build.log 2>&1

I'll take a look at the results and compare to what I'm getting on my
x86 machine.

All the best,

Chris

On Tue, Oct 8, 2024 at 5:20 AM Volker Schroer <dl1ksv@gmx.de> wrote:
>
> https://wiki.gnuradio.org/index.php?title=InstallingGR
> says:
> For Raspberry Pi OS64-bit ≥2021-10-30 the actual version of gnuradio is
> v3.10.5.1.
>
> Why can't you use this?
> > Chris,
> >
> > I did what you suggested.
> >
> > I then ran cmake as before. The result was the same except that the
> > following were added to the gnuradio enabled components:
> >
> > python-support
> > libad9361
> >
> > I'm considering giving up on this. I'm consuming a lot of your time and
> > this is a personal project only. I really appreciate the effort you have
> > put into this.
> >
> > I wanted to upgrade in order to add a component to my project that
> > requires 3.10.
> >
> > I wouldn't be upset if you want to pull the plug on this.
> >
> > Jim
> >
> > -----Original Message----- From: Chris Gorman
> > Sent: Monday, October 7, 2024 9:22 AM
> > To: Barry Jackson
> > Cc: discuss-gnuradio@gnu.org
> > Subject: Re: New install of GNU Radio executes old version
> >
> > Hello Jim,
> >
> > As Barry said you're missing lots of devel packages. I assume based
> > on your python version that you're using Raspbian Bullseye as your OS.
> > If that's the case, there is a list of packages that you'll need to
> > install to build gnuradio. I would try the list of packages
> > recommended on https://wiki.gnuradio.org/index.php?title=UbuntuInstall
> > .
> >
> > Basically,
> >
> > sudo apt install git cmake g++ libboost-all-dev libgmp-dev python3-numpy
> > \
> > python3-mako python3-sphinx python3-lxml doxygen libfftw3-dev \
> > libsdl1.2-dev libgsl-dev libqwt-qt5-dev libqt5opengl5-dev python3-pyqt5
> > \
> > liblog4cpp5-dev libzmq3-dev python3-yaml python3-click python3-click-
> > plugins \
> > python3-zmq python3-scipy python3-gi python3-gi-cairo gir1.2-gtk-3.0 \
> > libcodec2-dev libgsm1-dev libusb-1.0-0 libusb-1.0-0-dev libudev-dev
> > python3-setuptools
> >
> > sudo apt install pybind11-dev python3-matplotlib libsndfile1-dev \
> > libsoapysdr-dev soapysdr-tools python3-pygccxml python3-pyqtgraph
> >
> > and
> >
> > sudo apt install libiio-dev libad9361-dev libspdlog-dev
> > python3-packaging python3-jsonschema python3-qtpy
> >
> > Once you get those installed, you'll need to rebuild gnuradio. You're
> > looking for a list of gnuradio enabled components after running cmake
> > similar to the one I sent you.
> >
> > Hope this helps.
> >
> > Chris
> >
> > On Mon, Oct 7, 2024 at 4:21 AM Barry Jackson <zen25000@zen.co.uk> wrote:
> >>
> >> On 07/10/2024 01:11, Elmore Family wrote:
> >> > Chris,
> >> >
> >> > Here is what I have after cmake:
> >> >
> >> > -- ######################################################
> >> > -- # Gnuradio enabled components
> >> > -- ######################################################
> >> > -- * testing-support
> >> > -- * post-install
> >> > -- * doxygen
> >> > -- * man-pages
> >>
> >> You are missing lots of -devel packages for all those disabled missing
> >> components.
> >>
> >> As a guide look at the BuildRequires in our (Mageia) gnuradio.spec they
> >> start at line 75:
> >>
> >> http://svnweb.mageia.org/packages/cauldron/gnuradio/current/SPECS/
> >> gnuradio.spec?revision=2102453&view=markup
> >>
> >>
> >>
> >>
> >>
> >>
> >
> >
>
>


--
This email has been checked for viruses by AVG antivirus software.
www.avg.com