New install of GNU Radio executes old version

This is a continuation of the issue I had with the new installation not executing. That problem was solved by Volker Schroer ( thanks Volker).

The gnuradio-companion script now executes from the terminal but still not from the GUI.  

However, the version that executes is the old 3.9.4.0 not the 3.10.11 that I installed. Following is the result of execution from the terminal:

 

pi@raspberrypi:~ $ cd gnuradio/grc/scripts  pi@raspberrypi:~/gnuradio/grc/scripts $ python3 gnuradio-companion

Running from source tree  

Could not retrieve GNU Radio configuration directory from GNU Radio. Trying defaults. Could not retrieve GNU Radio persistent state directory from GNU Radio. Trying defaults. Using legacy state path '/home/pi/.grc_gnuradio'. Please consider moving state files to '/home/pi/.local/state/gnuradio'.

No section: 'main'  No section: 'main'  No section: 'main'  Warning: vocoder_codec2_decode_ps - option_attributes are for enums only, ignoring Warning: vocoder_codec2_encode_sp - option_attributes are for enums only, ignoring

<<< Welcome to GNU Radio Companion 3.9.4.0 >>>    Block paths:     /home/pi/.grc_gnuradio     /usr/local/share/gnuradio/grc/blocks     /usr/share/gnuradio/grc/blocks    Loading: "/home/pi/Softrock/Softrock_FT8.grc"  Done  

Loading: "/home/pi/Softrock/softrock_QT.grc"  Done  

Loading: "/home/pi/Softrock/Receive.grc"  Done  

Loading: "/home/pi/Softrock/FT8_Transmit.grc"  Done  

Loading: "/home/pi/Softrock/Transmit_CESSB.grc"  Done  

I don't understand what is happening.  

 

How can I execute the new version and also how can I get the GUI to execute it at all? Have I somehow installed it in the wrong place? I have never before installed from source - I always installed using apt-get install.

Does the old version need to be uninstalled? If so, how do I do that?    

I used the instructions "InstallingGRFromSource on Raspberry Pi" from the Wiki.

 

Jim

Virus-free.www.avg.com