Re: R: Funcube Dongle Pro Plus help

Hi Vincenzo,

no such thing as "closed" :)

Well, that path is where your GNU Radio is installed to. You should be
able to check it through `gnuradio-config-info --prefix`.

To repeat my questions:

1. Did `cmake...` run through successfully? Or did it end with an error?

2. Did `make` run through successfully? Or did it end with an error?

3. Did `sudo make install` run through successfully? Or did it end with
an error?

Best regards,
Marcus

On 8/31/20 7:25 PM, Vincenzo Mone wrote:
> Sorry Marcus,
> I thought it was closed as I did not get any reply from a long time.
> Please what I need to check as I still did not understood how to know The
> gnuradio path for the correct command:
>
> cmake -DCMAKE_INSTALL_PREFIX= "path to gnuradio installation" ../
>
> Thanks
>
> 73's de Enzo IK8OZV
> EasyLog 5 BetaTester
> EasyLog PDA BetaTester
> WinBollet BetaTester
> D.C.I. CheckPoint Regione Campania
> Skype: ik8ozv8520
>
>
>
>
>       *********************************
>       ******  GSM  +39 328 7110193  ******
>       *****  SMS  +39 328 7110193   *****
>       *********************************
>
>> -----Messaggio originale-----
>> Da: Marcus Müller <mueller@kit.edu>
>> Inviato: lunedì 31 agosto 2020 18:11
>> A: Vincenzo Mone <vimone@alice.it>; Gnuradio Mailing List <discuss-
>> gnuradio@gnu.org>
>> Oggetto: Re: Funcube Dongle Pro Plus help
>>
>> Vincenzo,
>>
>> please don't open a new thread for every other email you have sent. You
>> have gotten easily confused in the past, and we can avoid that if you can
> try
>> to focus on staying on a single email thread, and it was a big problem for
> you.
>> Please don't open a new thread before having solved this issue, and
> instead
>> reply to the things here, keeping discuss-gnuradio@gnu.org in CC:.
>>
>> Something went wrong during your software build or installation. We can't
>> tell you what that was - have you checked whether the cmake, the make,
>> the make install commands were successful?
>>
>> Best regards,
>>
>> Marcus
>>
>> On 8/31/20 5:09 PM, Vincenzo Mone wrote:
>>> Hello
>>>
>>> Please I am trying to install the FCDPROPLUS which is the Funcube
>>> Dongle Pro Plus.
>>>
>>> This is what I've done following the instructions on the author page:
>>>
>>> git clone https://github.com/dl1ksv/gr-fcdproplus
>>>
>>> cd ~/gr-fcdproplus
>>>
>>> mkdir build
>>>
>>> cd build
>>>
>>> cmake -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_BUILD_TYPE=Release
>> ../
>>> make
>>>
>>> sudo make install
>>>
>>> sudo ldconfig
>>>
>>> then I have created a file named '99-usb-serial.rules'  with the
>>> following content:
>>>
>>> SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8"
>> ATTRS{idProduct}=="fb56"
>>> MODE:="0666"
>>>
>>> SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8"
>> ATTRS{idProduct}=="fb31"
>>> MODE:="0666"
>>>
>>> KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
>>> ATTRS{idProduct}=="fb56", MODE="0666"
>>>
>>> KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
>>> ATTRS{idProduct}=="fb
>>>
>>> Then:
>>>
>>> cd /etc/udev/rules.d
>>>
>>> sudo cp -v ~/<your folder>/99-usb-serial.rules ./
>>>
>>> sudo udevadm trigger
>>>
>>> After that executing grc  I sould find in Fcd
>>>
>>> Funcube Dongle
>>>
>>> Funcube Dongle control
>>>
>>> Funcube Dongle Pro+
>>>
>>> Funcube Dongle Pro+ control
>>>
>>> But I do not find any FCD group.
>>>
>>> Please anybody can tell me if I am doing something wrong?
>>>
>>> Thanks
>>>
>>> 73's de Enzo IK8OZV
>>> EasyLog 5 BetaTester
>>> EasyLog PDA BetaTester
>>> WinBollet BetaTester
>>> D.C.I. CheckPoint Regione Campania
>>> Skype: ik8ozv8520
>>>
>>>
>>>
>>>
>>> *********************************
>>>
>>> ****** GSM  +39 328 7110193  ******
>>>
>>>       *****     SMS  +39 328 7110193 *****
>>>
>>>       *********************************
>>>