Re: R: Again on FCDPROPLUS

Dear Vincenzo,

copying and pasting correctly is necessary!

Best regards,
Marcus

On 28/04/2020 10.53, Vincenzo Mone wrote:
> Hello Barry,
> Thanks also to you for the help, but the problem is everyone is trying to
> help me
> Saying what to do as I know how Linux works.
> Unfortunately I am a beginner user and do not know anything about Linux.
> Just starting and following all you suggestions but the problem is I do not
> understand
> What to do if some says for example start as administrator as how I saw it
> is different from windows O.S.
>
> BTW I have tried how you suggested me but it did not work maybe because how
> I said before
> Did not do correctly the commands.
> Here is what I've done:
> I have opened the Terminal and typed gedit which is the editor.
> Pasted the 4 lines.
> Closed the file saving it in Enzo which is the folder I see on the Desktop
> Always in the terminal I have typed:
>
> sudo cp -v ~/Desktop/enzo/99-usb-serial.rules
>
> but after have inserted the requested password I got the error:
>
>
> cp: missing destination file operand after
> '/home/enzo/Desktop/enzo/99-usb-serial.rules'
>
> Where am I still missing?
>
> Finally you said to be sure to set the Device name; mine is
> "hw:CARD=V20,DEV=0"
> How to know the Device name?
> I can just say that it is a Funcube Dongle Pro Plus.
> Thanks to you and to everyone and please apologise if I am bothering
> somebody
>
>
> 73 de Enzo IK8OZV
> EasyLog 5 BetaTester
> EasyLog PDA BetaTester
> WinBollet BetaTester
> D.C.I. CheckPoint Regione Campania
> Skype: ik8ozv8520
>
>
>
>
>       *********************************
>       ******  GSM  +39 328 7110193  ******
>       *****  SMS  +39 328 7110193   *****
>       *********************************
>
>> -----Messaggio originale-----
>> Da: Barry Duggan <barry@dcsmail.net>
>> Inviato: martedì 28 aprile 2020 01:48
>> A: vimone@alice.it
>> Cc: Discuss Gnuradio <discuss-gnuradio@gnu.org>
>> Oggetto: Re: Again on FCDPROPLUS
>>
>> Vincenzo,
>>
>> Here is what you need to do to set up udev rules:
>>
>> In any of your folders (<your folder>), create a file named '99-usb-
>> serial.rules' with the following content:
>>
>> SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb31"
>> MODE:="0666"
>>
>> Save the file. Then, in a Terminal screen:
>>
>> cd /etc/udev/rules.d
>> sudo cp -v ~/<your folder>/99-usb-serial.rules . # note the
>> period!
>> sudo udevadm trigger
>>
>> Be sure to set the Device name; mine is "hw:CARD=V20,DEV=0" (without the
>> quotes). If that doesn't work, follow the procedure in
>> https://wiki.gnuradio.org/index.php/Audio_Source#Device_Name starting
>> with "For Linux ALSA users...".
>>
>> Let me know how it works for you.
>> --
>> Barry Duggan KV4FV
>>
>> On Sun, 26 Apr 2020 18:29:17 +0200, Vincenzo Mone wrote:
>>
>> Hello,
>>
>> Please I have a doubt.
>>
>> Reading on the FCDPROPLUS site I read:
>>
>> Important
>> Don't forget the udev rules: For instance:
>>
>> Udev rules for the Funcube Dongle Pro (0xfb56) and Pro+ (0xfb31)
>>
>> HIDAPI/libusb:
>>
>> SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8" ATTRS{idProduct}=="fb56"
>> MODE:="0666" SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8"
>> ATTRS{idProduct}=="fb31" MODE:="0666"
>>
>> HIDAPI/hidraw:
>>
>> KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
>> ATTRS{idProduct}=="fb56", MODE="0666" KERNEL=="hidraw*",
>> ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
>> ATTRS{idProduct}=="fb31",
>> MODE="0666
>>
>> Please what does it means?
>>
>> Maybe I am missing something.
>>
>> Any help?
>>
>> Thanks
>>
>> 73 de Enzo IK8OZV
>> EasyLog 5 BetaTester
>> EasyLog PDA BetaTester
>> WinBollet BetaTester
>> D.C.I. CheckPoint Regione Campania
>> Skype: ik8ozv8520
>
>