Re: [Discuss-gnuradio] gnuradio.conf file

That should be:

3) Edit <install_dir>/etc/gnuradio/conf.d/grc.conf and add/edit the line:

On 8/21/19 18:54, Ron Economos wrote:
> The xterm executable is used when you have a flow graph with the
> Generate Options set to "No GUI" and Run Options set to "Prompt for
> Exit". In that scenario, GNU Radio Companion wants to open a terminal
> for the prompt for exit to exist in. If you don't have anything
> configured, GNU Radio Companion will hang.
>
> If you never use the "No GUI" option, then you're fine. If you do want
> to use it, then do the following:
>
> 1) sudo apt-get install xterm
>
> 2) Edit ~/.gnuradio/grc.conf and add/edit the line:
>
> xterm_missing = /usr/bin/xterm
>
> 3) Edit <install_dir>/etc/gnuradio/conf.d/ and add/edit the line:
>
> xterm_executable = /usr/bin/xterm
>
> Ron
>
> On 8/21/19 18:16, Barry Duggan wrote:
>> Hi Volker and Michael,
>>
>> Thank you for that information. On my Raspbian Buster system I found
>> the following:
>>
>> - there is a /usr/bin/x-terminal-emulator, but no 'xterm' anywhere I
>> could find;
>> - there is a /usr/local/etc/gnuradio/conf.d/grc.conf file, but the
>> xterm_executable is blank;
>> - env shows 'TERM=xterm-256color'.
>>
>> Since the error message I got applied to 3.7, I'm guessing it didn't
>> get changed for 3.8 or 3.9.
>>
>> It's all very confusing, but since it works 'as is', I think I will
>> leave it alone ;)
>>
>> Best regards,
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio