Re: [Discuss-gnuradio] Tuning in VLF with a sound card

On 05/15/2019 03:23 PM, Brad Hein wrote:

Great suggestion thank you! This also gives me new topics to read up on as I am still a VLF amateur. 

[Sent from mobile device]

I used a Berhringer "mini-MIC" microphone amplifier, which has a balanced, XLR, input, and has bandwidth out to
  about 90kHz.  Worked a champ.  Not as cheap as a DIY op-amp+transformer approach, but more convenient,
  to be sure.

On Wed, May 15, 2019, 1:20 PM John Coppens <john@jcoppens.com wrote:

On Thu, 2 May 2019 16:22:24 -0400
Brad Hein <linuxbrad@gmail.com> wrote:

> I took a Raspberry Pi and attached a 48KHz USB sound card, with a big
> magnetic loop antenna fed into the mic.

Just a suggestion: If you have a loop antenna, which is a symmetrical antenna,
and couple it to an asymmetrical input (MIC), you will make the antenna
more sensitive to static noise. I'd suggest you use either a transformer or
an 'instrumentation amplifier' with an operational amplifier to convert
the signal from the antenna to asymmetrical signal.

A transformer would be easiest to install at the base of the antenna (no
need for a supply). The op-amp amplifier would cover a larger bandwidth.
(it would also offer some protection for your computer).

John

_______________________________________________  Discuss-gnuradio mailing list  Discuss-gnuradio@gnu.org  https://lists.gnu.org/mailman/listinfo/discuss-gnuradio