Re: [Discuss-gnuradio] Installing GNURadio On Raspberry Pi

Building on ARM isn't that horrible. On a BeagleBoard-X15, I can build
GNU Radio from source in 2 hours, 12 minutes. That's with 2 GB of RAM
and 2 GB of swap on SD card.

Ron

On 4/24/19 01:05, lists wrote:
> I built it on a beagle board black, which is not as powerful as a RPI these days. This isn't all that fresh in my memory.
>
> I don't recall having to set up VM beyond stock. Slow compilation...well yeah!
>
> It might just be me, but the only signal processng I ever found useful on those SBCs was ADSB decoding. Rtlsdr and some flavor of dump1090.
>
>
>
>   Original Message
>
>
>
> From: mueller@kit.edu
> Sent: April 24, 2019 12:51 AM
> To: discuss-gnuradio@gnu.org; lists@lazygranch.com; pczzs@yahoo.com
> Subject: Re: [Discuss-gnuradio] Installing GNURadio On Raspberry Pi
>
>
> Hi,
>
> On Tue, 2019-04-23 at 19:31 -0700, lists wrote:
>> https://wiki.gnuradio.org/index.php/Download
> uhhh that wiki page is ... dated. It also doesn't solve the issue of
> not being able to import gr-osmosdr, which isn't part of GNU Radio
> itself!
>
> Also, clearly *not* the way I'd recommend on a raspberry Pi:
>
> What lazygranch recommends is a source build, which takes roughly
> forever on a raspberry Pi, and requires use of copious amount of swap
> memory, due to the limited amount of RAM of a Raspberry Pi.
>
> So, if you can, get a binary installation of GNU Radio. It seems you
> already have one!
>
> Then, you'll need to make sure you've got a working gr-osmosdr
> installation on your Pi. How did you install GNU Radio and gr-osmosdr
> on your Raspberry Pi so far?
>
> Best regards,
> Marcus
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio