Re: [Discuss-gnuradio] Major OpenCL Updates

Ubuntu 16.04. I followed the notes for the nvidia install. Got me past
the incompatible headers. Would be cool to steal the cmake opencl
magic they use in gr-phosfor so it picks up the right includes and
whatnot paths. Anywho, now I get:

home/anon/gr-clenabled/lib/clFilter_impl.h:26:24: fatal error:
fir_filter.h: No such file or directory

I didn't poke around to see if this is auto-generated somehow, but
given the recent commits relating to the topic, is it possible it just
got missed in a commit? It is, indeed, not there:

anon@anon:~/gr-clenabled$ find . -name "fir_filter.h"
anon@anon:~/gr-clenabled$

On Sun, May 7, 2017 at 5:44 PM, GhostOp14 <ghostop14@gmail.com> wrote:
> Hi Anon. I set it up for 1.2. The biggest gotcha I've run into in the
> build process is missing the cl.hpp file, but how to get it can vary by OS.
> There's some setup notes in the setup_help directory for debian and Ubuntu
> that may help you out. What OS are you running it on?
>
> On Sun, May 7, 2017 at 4:35 PM, Anon Lister <listeranon@gmail.com> wrote:
>>
>> Neat. What opencl implementation are you building against?
>>
>> I get errors related to _svm_ parts of code. I.e.
>> cl_device_svm_capabilities was not declared in this scope. Trying to use the
>> Nvidia cuda sdk, just downloaded from their developer site (ver 8.0).
>>
>>
>>
>> On May 6, 2017 8:59 AM, "Ghost Op" <ghostop14@gmail.com> wrote:
>>>
>>> Hi everyone. A number of you have asked me to keep you informed of
>>> any major updates on the OpenCL gr-clenabled project and the past
>>> couple of weeks have been pretty active. There's now a version up in
>>> the repo with a significant number of updates and all blocks have been
>>> validated (at least in their basic modes).
>>>
>>> So here's the major updates:
>>>
>>> Validation flowgraphs - Almost all test flowgraphs have been posted in
>>> the examples directory. You can run the comparisons on your own
>>> hardware for comparison. This is important on older cards that don't
>>> support double precision (you can check with the included clview
>>> command-line tool).
>>>
>>> Signal Source Block - A discrepancy in the output was due to an
>>> OpenCL issue. Turns out single/float precision wasn't producing
>>> accurate enough numbers. This block now uses double precision if the
>>> hardware supports it (most new hardware will) for an even cleaner
>>> signal than the native block (no secondary nodes).
>>>
>>> Quad Demod - Same single/double trig discrepancy due to precision
>>> which was corrected.
>>>
>>> Filters - A lot of work this week has been spent on filter validation
>>> (hence the few emails about TD vs. FD from yesterday)
>>> - Both FIR and FFT implementations are now implemented and
>>> producing correct output
>>> - A generic tap-based block was added for more flexibility
>>> - A test-clfilter command-line tool was added to test performance
>>> given a number of taps across OpenCL FIR, GNURadio FIR, OpenCL FFT,
>>> and GNURadio FFT so you can pick the best performing filter given your
>>> implementation.
>>>
>>> Costas Loop - A Costas Loop was added, however the performance on a
>>> GPU kernel is horrible. Because of the sequential calculations, it
>>> couldn't be SIMD parallel processed so it was written as an OpenCL
>>> task-based kernel. This means it just runs single-threaded on a
>>> single core, which is why the performance is so bad. However if
>>> anyone has an OpenCL-capable FPGA card like an Altera I'd love to see
>>> the result of running the included test-clenabled timing tool and see
>>> how the Costas Loop performs. I just don't have access to one.
>>>
>>> Performance - Code was added to detect if the hardware supports Fused
>>> Multiply/Add functionality for added kernel performance. If it's
>>> available it's used.
>>>
>>> OpenCL Setup Instructions - For those that may not have OpenCL set up,
>>> I added some installation guides in the setup_help directory for
>>> Ubuntu and Debian with step-by-steps on getting it up and running.
>>> I've taken both of those processes on several systems and been up and
>>> running pretty quickly. I also pulled some of the important points
>>> into the main page's README, since in my experience that's generally
>>> all I look through too.
>>>
>>> Study - Based on the filter updates, the filter section in the study
>>> in the docs directory was completely rewritten. The report was noted
>>> as updated.
>>>
>>> I think that's the biggest updates for now. As always let me know if
>>> anyone runs into any issues.
>>>
>>> _______________________________________________
>>> Discuss-gnuradio mailing list
>>> Discuss-gnuradio@gnu.org
>>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio