Re: [Discuss-gnuradio] Building gnuradio master fails

Hello,

Cleaning (or even deleting the whole build directory) before rebuilding,
had helped me in similar cases.
Maybe you could give it a try

Best,
Kostis


On 05/20/2017 06:58 PM, Ralph A. Schmid, dk5ras wrote:
> Hi,
>
> on a Kubuntu 16.04 system building gnuradio from source fails. Branch is
> master, downloaded right now.
>
> UHD is also the latest version from right now.
>
> Any ideas what it could be? Here the output:
>
>
> [ 99%] Built target _trellis_swig1
> [ 99%] Building CXX object
> gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o
>
> [ 99%] Built target _trellis_swig0
> [ 99%] Built target pygen_gr_uhd_swig_08777
> [ 99%] Built target pygen_gr_video_sdl_swig_ce2c9
> [ 99%] Built target pygen_gr_vocoder_swig_43253
> [ 99%] Built target _video_sdl_swig
> [ 99%] Built target _vocoder_swig
> [ 99%] Built target pygen_gr_fcd_swig_c4332
> [ 99%] Built target _fcd_swig
> [ 99%] Built target pygen_gr_wavelet_swig_89b19
> [ 99%] Built target _wavelet_swig
> [ 99%] Built target pygen_gr_wxgui_swig_78659
> [100%] Built target _wxgui_swig
> [100%] Built target pygen_gr_zeromq_swig_4d7be
> [100%] Built target _zeromq_swig
> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function
> 'PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*, PyObject*,
> PyObject*)':
> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:27935:15:
> error: 'class uhd::usrp::dboard_iface' has no member named 'set_gpio_debug'
> (arg1)->set_gpio_debug(arg2,arg3);
> ^
> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function
> 'PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*, PyObject*,
> PyObject*)':
> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:29301:16:
> error: 'class uhd::usrp::dboard_iface' has no member named 'set_gpio_debug'
> (*arg1)->set_gpio_debug(arg2,arg3);
> ^
> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In function
> 'void init_uhd_swig()':
> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:49517:91:
> error: 'ATR_REG_IDLE' is not a member of 'uhd::usrp::dboard_iface'
> ant(d, "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int
>> (uhd::usrp::
> ^
> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:49518:94:
> error: 'ATR_REG_TX_ONLY' is not a member of 'uhd::usrp::dboard_iface'
> (d, "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int
>> (uhd::usrp::
> ^
> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:49519:94:
> error: 'ATR_REG_RX_ONLY' is not a member of 'uhd::usrp::dboard_iface'
> (d, "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int
>> (uhd::usrp::
> ^
> /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:49520:98:
> error: 'ATR_REG_FULL_DUPLEX' is not a member of 'uhd::usrp::dboard_iface'
> "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int
>> (uhd::usrp::
> ^
> gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for target
> 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o' failed
> make[2]: ***
> [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] Error 1
> CMakeFiles/Makefile2:15016: recipe for target
> 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed
> make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2
> Makefile:160: recipe for target 'all' failed
>
>
>
> --
>
> Ralph A. Schmid
> Mondstr. 10
> 90762 Fürth
> +49-171-3631223
> ralph@schmid.xxx
> http://www.bclog.de/
>
>
>
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>


_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio