Re: [Discuss-gnuradio] Last step in GNURadio - SDRPlay install

You are correct Cinaed and I understand what you mean.

Problem is that sdrplay does not deliver the data to the FFT. I enclosed
the output from GRC to provide more info.
Still looking for a solution.

73 PA3A


Op 27-1-2017 om 0:21 schreef Cinaed Simson:

> Your grc file - the file which was executed by gnuradio and generated
> the selective outputs below.
>
> -- Cinaed
>
>> Kind regards,
>> Arie PA3A
>>
>> ---------
>> /Generating: '/home/aw/Bureaublad/top_block.py'//
>> //
>> //Executing: /usr/bin/python -u /home/aw/Bureaublad/top_block.py//
>> //
>> //Using Volk machine: sse4_1_64_orc//
>> //gr-osmosdr v0.1.4-75-gae686c46 (0.1.5git) gnuradio 3.7.9//
>> //built-in source types: file fcd rtl_tcp sdrplay rfspace redpitaya //
>> //get_devices started//
>> //Device count: 1//
>> //sdrplay=0,label='SDRplay RSP'//
>> //get_devices end//
>> //get_num_channels: 1//
>> //get_num_channels: 1//
>> //set_sample_rate start//
>> //rate = 1e+06//
>> //diff = -1.048e+06//
>> //set_sample_rate end//
>> //get_num_channels: 1//
>> //get_num_channels: 1//
>> //get_num_channels: 1//
>> //set_center_freq start//
>> //freq = 9.34e+07//
>> //diff = -1.066e+08//
>> //set_center_freq end//
>> //get_num_channels: 1//
>> //get_num_channels: 1//
>> //get_num_channels: 1//
>> //get_num_channels: 1//
>> //get_num_channels: 1//
>> //get_num_channels: 1//
>> //get_num_channels: 1//
>> //set_gain started//
>> //gain = 10//
>> //set_gain end//
>> //get_num_channels: 1//
>> //get_num_channels: 1//
>> //get_num_channels: 1//
>> //get_num_channels: 1//
>> //reinit_device started//
>> //after mutex.lock//
>> //mir_sdr_Init started//
>> //reinit_device end/
>>
>> ----------------------------
>>


_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio