[Discuss-gnuradio] USRP's not Communicating

Hello,

I want to transmit the data between two USRP's and make them communicate
with each other. But I guess the packets are not being received
properly.
I am connected the two USRP's to the same laptop and trying it. Is that
applicable? I mean, will it work if I do that? Or should I connect to
two computers and perform that? I have been receiving this error.

linux; GNU C++ version 4.8.4; Boost_105500;
UHD_003.009.git-144-g407e3086

Using Volk machine: avx_64_mmx
-- Opening a USRP1 device...
-- Using FPGA clock rate of 64.000000MHz...

No gain specified.
Setting gain to 56.250000 (from [0.000000, 112.500000])

UHD Warning:
The hardware does not support the requested RX sample rate:
Target sample rate: 0.050000 MSps
Actual sample rate: 0.250000 MSps

Symbol Rate: 25000.000000
Requested sps: 2.000000
Given sample rate: 250000.000000
Actual sps for rate: 10.000000

Requested sample rate: 50000.000000
Actual sample rate: 250000.000000
ok = False pktno = 53034 n_rcvd = 1 n_right = 0
ok = False pktno = 24 n_rcvd = 2 n_right = 0
ok = False pktno = 35 n_rcvd = 3 n_right = 0
ok = False pktno = 44 n_rcvd = 4 n_right = 0
ok = False pktno = 46 n_rcvd = 5 n_right = 0
ok = False pktno = 46 n_rcvd = 6 n_right = 0
ok = False pktno = 3872 n_rcvd = 7 n_right = 0
ok = False pktno = 12304 n_rcvd = 8 n_right = 0
ok = False pktno = 49 n_rcvd = 9 n_right = 0
ok = False pktno = 50 n_rcvd = 10 n_right = 0
ok = False pktno = 54 n_rcvd = 11 n_right = 0
ok = False pktno = 200 n_rcvd = 12 n_right = 0
ok = False pktno = 63 n_rcvd = 13 n_right = 0

Please suggest. Thank you

Regards,
Ravi

--
Posted via http://www.ruby-forum.com/.

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio