[Discuss-gnuradio] a two blocks synchronizing problem

Hello

I created 2 new blocks, one is an encoder and the other one a decoder. I
needed the encoder block to had 8 input items (from a vector source) and 11
output items, so I set: consume each(8) and return(11). I did not have any
problem with it.

Now, for the decoder block, I needed to had 11 input items and 8 output
items, so I set: consume each(11) and return (8).

I printed out the outputs with "cout << out[i];" .

The problem: The encoder´s outputs are fine, they are what I expected them
to be.
But, the decoder´s outputs are giving me trouble: At first, it behaves well,
the decoder´s input corresponds with encoder´s output and the decoder´s
output corresponds with the vector source´output. But then, after a while,
the decoder´s input do not begin in the first value as the encoder´s output
and thus, the decoder´s output is not equal to the vector source´s output.

For example, if the encoder´s output is: 20.57, 11.45, 14.82, 17.81, 16.95,
16.63, 20.57, 15.14, 16.95, 11.45, 20.57. At first, the decoder´s input is
exactly the same, but after a while, are: 17.81, 16.95, 16.63, 20.57, 15.14,
16.95, 11.45, 20.57, 20.57, 11.45, 14.82. It begins in the fourth value
instead the first.

Is there a way to synchronize these two bloks? So the decoder´s input is
always the same as the encoder´s output?

am I missing something? What should I do?

Thank you

David

--
View this message in context: http://gnuradio.4.n7.nabble.com/a-two-blocks-synchronizing-problem-tp54499.html
Sent from the GnuRadio mailing list archive at Nabble.com.

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio