Re: [Discuss-gnuradio] B210 two-channel operation

On 01/27/2015 02:29 PM, Daniel Marlow wrote:

Hello,

   OS: Ubuntu 14.01.1 

   gnu-radio:  3.7.6

   Dell Optiplex 765    

   I am having trouble using the B210 USRP in two channel mode.    Things work well when I use grc to configure the B210 with one channel, but when I try using two channels, I get the error shown below.     This is quite similar to a problem I had earlier with a TVRX2, which was fixed with a "-M build."    I am still using the same build and the TVRX2 continues to work fine.    Perhaps I am not configuring the B210 properly?    I attach the .grc and top_block.py files.

   Any suggestions would be most welcome.

Sincerely,

Dan Marlow

Executing: "/home/marlow/gnuradio/B210/top_block.py"

linux; GNU C++ version 4.8.2; Boost_105400; UHD_003.008.000-50-gb228b755

Using Volk machine: ssse3_64_orc

libGL error: failed to load driver: swrast

-- Operating over USB 2.

-- Initialize CODEC control...

-- Initialize Radio control...

-- Performing register loopback test... pass

-- Performing register loopback test... pass

-- Performing CODEC loopback test... pass

-- Performing CODEC loopback test... pass

-- Asking for clock rate 32.000000 MHz... 

-- Actually got clock rate 32.000000 MHz.

-- Performing timer loopback test... pass

-- Performing timer loopback test... pass

-- Setting master clock rate selection to 'automatic'.

Traceback (most recent call last):

  File "/home/marlow/gnuradio/B210/top_block.py", line 178, in <module>

    tb = top_block()

  File "/home/marlow/gnuradio/B210/top_block.py", line 99, in __init__

    self.uhd_usrp_source_0.set_samp_rate(samp_rate)

  File "/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py", line 2774, in set_samp_rate

    return _uhd_swig.usrp_source_sptr_set_samp_rate(self, *args, **kwargs)

RuntimeError: LookupError: IndexError: multi_usrp: RX channel 1 out of range for configured RX frontends

>>> Done

  
  _______________________________________________  Discuss-gnuradio mailing list  Discuss-gnuradio@gnu.org  https://lists.gnu.org/mailman/listinfo/discuss-gnuradio  

Your subdev spec should be:

A:A A:B

--   Marcus Leech  Principal Investigator  Shirleys Bay Radio Astronomy Consortium  http://www.sbrac.org