Re: [Discuss-gnuradio] Issue with deinterleave block from a file source to USRP sink with x300

Indeed.
Would the following patch to the documentation be useful (since streams to stream seems to replace it properly)?

diff --git a/gr-blocks/include/gnuradio/blocks/deinterleave.h b/gr-blocks/include/gnuradio/blocks/deinterleave.h
index a3b5480..1b9d5c1 100644
--- a/gr-blocks/include/gnuradio/blocks/deinterleave.h
+++ b/gr-blocks/include/gnuradio/blocks/deinterleave.h
@@ -40,6 +40,10 @@ namespace gr {
* a single input to each output unless blocksize is given in the
* constructor.
*
+ * This block can only process one block at a time. Therefore its
+ * efficiency may be limited. It is advised to use the streams to
+ * stream block instead.
+ *
* \code
* blocksize = 1
* connections = 2

Ruben

From: discuss-gnuradio-bounces+ruben.merz=swisscom.com@gnu.org [mailto:discuss-gnuradio-bounces+ruben.merz=swisscom.com@gnu.org] On Behalf Of Martin Braun
Sent: Tuesday, September 23, 2014 1:11 AM
Cc: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] Issue with deinterleave block from a file source to USRP sink with x300

It seems deinterleave is both buggy and inefficiently designed. The bug is the relative rate is wrong, the inefficiency is that it only works on one block at a time. I suggest using something else.

M

On Fri, Sep 19, 2014 at 2:58 PM, <Ruben.Merz@swisscom.com> wrote:
Hello,

I have the following setup: a file source, a deinterleave block and a USRP sink (see the attached .grc and related .png). This setup is a test to distribute two different signals on two channels of the USRP x300 (the file source loads a binary file with alternated channels containing 64 bit long IQ samples - 32 real followed by 32 imaginary - channel 1/channel 2/channel 1/channel 2/etc...).

The hardware is a USRP x300 with two wideband SBX (SBX-120) boards.

Now, the above setup used to function without a hitch. But recently, it completely freezes gnuradio. Basically, I start the flowgraph and quickly get a large number of 'L' and no signal is transmitted. The only thing I can do is then to kill gnuradio-companion and related python processes.

The interesting thing is that if I replace the deinterleave block by a "stream to streams" block, everything works fine. I am bit puzzled as to what I am missing.

The operating system is Ubuntu 14.04 LTS (updated state), UHD is the head of the maint branch, and gnuradio as well (UHD_003.007.002-2-gdb35bf46 and Gnuradio: 9dcb5067c55a0630c9edca6b62a32b1f8e633930). Firmware is also the most recent. I have attached the .grc, and the binary file I am using can be obtained here: http://www.net.t-labs.tu-berlin.de/~ruben/files/sine_test_10kHz_20kHz_cpx_float_2chan_interleaved_1MSs.bin.

Assuming there is not something wrong in my .grc setup, how do I debug this issue?
Thanks for any suggestion or help,
Ruben

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio