[Discuss-gnuradio] FW: Using UDP (Baz)

Hey Marcus,

I have a UDP network going on where I am sending the same signal from two different hosts to another host, where they will be cross-correlated/ multiplied together. I have successfully done this, but I am dropping data over the network (which seems to be at random between the two hosts that are sending the signal).

Now, I have switched the regular UDP Sink and source blocks with their 'Baz' counterparts in order to get feedback as to what is the source of the data loss problem. So far, on the host receiving the signals, the pop-up dialog is basically telling me that:

"Change min_buffer_output to 25000 for Block 1, 2, 6, and 7"

Now I understand that I have to change the buffer output, but since I have a lot of blocks in this architecture, it's confusing when it tells me block 1 or block 2 etc. (Unless it's telling me to start from the first block I used and count and if so, I will still get the same message.)

Hope this explains it well enough


-----Original Message-----
From: discuss-gnuradio-bounces+marcus.ward=jhuapl.edu@gnu.org [mailto:discuss-gnuradio-bounces+marcus.ward=jhuapl.edu@gnu.org] On Behalf Of Marcus Müller
Sent: Monday, August 04, 2014 3:21 PM
To: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] Using UDP (Baz)

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi Marcus,

differentiate in what manner? You mean "is of the type <xy>" or is the same object?
C++ or python?
And: This sounds like you're doing architectural interesting things; maybe give us some background on this question :)

Greetings,
Marcus

On 04.08.2014 20:14, Ward, Marcus D. wrote:
>
>
> I'm trying to figure out how you would differentiate the blocks you
> use in the flow graph in gnuradio? How can you tell if a block is
> (Block 1) or (Block 2) etc.?
>
> Marcus
>
>
>
> _______________________________________________ Discuss-gnuradio
> mailing list Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1

iQEcBAEBAgAGBQJT390OAAoJEAFxB7BbsDrLNGUH/0irL5F3KMFfDz79uHVdcqAI
cmwBYR0hMNWAj90Ng5ZXXGFOkxUTdSIRcfjkNeTRf8gAHk0et8R6BNHWOP4ulO/A
7MP1IO3ioeXEdFvFjmu4f8jsfKTu61XS4DhYEgrW0lhJyZfPPwkOXfi0M9irwYfJ
0E3pBMiSEu509QJA7tf2bMQ/s8TJ3VKYS5YsrSy0xnmm2bU0dJMMbhF2tdSDkFcr
mz/jYgoFznnUGOL+KGYeYtyf5uYyi9sJ6W/OJ4WJnHzmGbieCqWhl18/lDA9OQ3S
zYmAfWdz9Owbgq8R1jqOuhKKe8OQ8VkIAQ6EX5wTGrlmGGYNoAmVVSRMO72fLA8=
=lVZQ
-----END PGP SIGNATURE-----

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio