Re: [Discuss-gnuradio] UHD Announcement - July 19th 2011

On Sat, 2011-07-23 at 18:55 +0100, Nemanja Trecakov wrote:
> There are two more things I am not clear with.
>
> > >
> > > I understand that the FPGA and firmware images have to be updated,
> i.e. the newest images downloaded and "flashed" on the SD card in case
> of USRP2.
> > > However, since the source code is new too, should I rebuild and
> reinstall the UHD from the new source?
> > >
> >
> > The host code and images must match. If you want to use the latest
> > images, you have to download and install the latest UHD host code as
> > well.
> http://code.ettus.com/redmine/ettus/projects/uhd/wiki#Source-code
>
> 1. Why must code and images match? If FPGA image is newer than the UHD
> code one have installed, according to my logic only things that are
> different would not work.

Because we tend to change all sorts of stuff under the hood between
releases. We try to keep things sane by using a FPGA "compatibility
number", and use that compatibility number to ensure you're using
compatible host code and FPGA images.

>
> 2. I want to adjust the FPGA image slightly. I want to write some
> extra Verilog code and build it myself with Xilinx. However, since I
> change the image on the FPGA, and the installed UHD code has to match
> to the image, how can this work?

You can do whatever you want to the FPGA image, we're just saying you
should start with corresponding FPGA and UHD host code versions.

--n

>
> Thank you in advance.
>
> Nemanja
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio