Re: [Discuss-gnuradio] Help required --Urgent--F led light glowing and D led light is not glowing

Where is the ISE 12 branch? Because when you download the repository, they
don't have ISE 12 folder. The top file is in fpga/usrp2/top/u2_rev3 path.
How to know is it ok for ISE 12? Which verilog file is only for ISE 12.
Verilog is verilog, it suppose to be ok for all version of ISE, no?

Gab

----- Original Message -----
From: "Nick Foster" <nick@ettus.com>
To: "anirudh2059." <anirudh2059@gmail.com>
Cc: <Discuss-gnuradio@gnu.org>
Sent: Thursday, December 23, 2010 1:06 PM
Subject: Re: [Discuss-gnuradio] Help required --Urgent--F led light glowing
and D led light is not glowing

> On Wed, 2010-12-22 at 22:53 -0800, anirudh2059. wrote:
>> Hi
>>
>> When I port the firmware and the u2_rev3.bin downloaded from the
>> repository
>> everything works fine. But when i compile the usrp2 code (successful
>> compilation) and I port it with my firmware, there is a problem. The
>> problem is the F led light glows and the D led light does not glow. I am
>> using ISE 12.3 version and the size of the u2_rev.bin is 842.4 kb.
>>
>
> What commands are you using to compile it? Which git branch are you
> compiling? Are you using stock firmware or have you modified it? Are you
> using the ise12 branch?
>
> If you explain your problem clearly and in detail we will be able to
> diagnose it.
>
> --n
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio