Wednesday, December 22, 2010

[Discuss-gnuradio] Re: [USRP-users] UHD Announcement - December 13th 2010 - MIMO cable support

Is the FPGA code for mimo cable support available? Is that also on the
packet_router branch (you mention only the host code below)? If not, how
can I access it?

Also, are there example host programs that exercise this code?

Thanks,
Arun

On 12/13/2010 7:34 PM, Josh Blum wrote:
> Hello list,
>
> I would like to announce support for the MIMO cable with UHD. The
> support is experimental, so its not in the mainline yet, and is only
> available for USRP2 at the moment.
>
> The source for the FPGA code has not yet been pushed but you can get the
> pre-built images here:
> http://www.ettus.com/downloads/uhd_images/experimental/UHD-mimo-cable-support/
>
> The supporting host code is available on the packet_router branch of the
> uhd repo:
> http://code.ettus.com/redmine/ettus/projects/uhd/repository/show?rev=packet_router
>
> Here is an excerpt from the docs on the MIMO cable in UHD:
>
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> MIMO cable configuration
>> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> Using the MIMO cable, two USRP devices can be grouped together in a multi-device configuration.
>> Only one device in the configuration can be attached to the ethernet.
>> This device will be referred to as the master, and the other device, the slave.
>>
>> * The master provides reference clock and time synchronization to the slave.
>> * All data passing between the host and the slave is routed over the MIMO cable.
>> * Both master and slave must have different IPv4 addresses but in the same subnet.
>> * The master and slave may be used individually or in a multi-device configuration.
> I hope that explains it. Feedback is welcome!
>
> Thanks,
> -Josh
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com


_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

No comments:

Post a Comment