Re: [Discuss-gnuradio] problem of USRP2+WBX

Am Sa 09.10.2010 08:33, YouheiFujii <gnuradio@smappies.net> schrieb:

> Hi all,
>
>
> I get WBX, and I want to try benchmark_tx/rx.py on USRP2.
>
> But when I use find_usrps, the program returns "No USRP found.".
>
> I searched mailing-lists.
> I need to update firmware.
>
> I tried this.
>
> --
> sudo u2_flash_tool --dev=/dev/sdd1 -t s/w xrx_wbx_raw_eth_20100608.bin -w
> --
>
> But after that, I can't use WBX and other dbs.
> Brfore that, I can use dbs with WBX exceptions.
>
>
> Is there a thing that we some should try?
>
>
>
> Regards,
> youhei
>
> --
> gnuradio@smappies.net
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> http://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Hello Youhei,

first you should make sure that the FPGA bitstream is also correctly on the SD card, use the u2_flash_tool to copy both files to the card. You should use http://code.ettus.com/redmine/ettus/attachments/70/u2_rev3-20100603.bin as the FPGA image.

Then, you should check if the USRP2 boots properly, i.e., if LED "F" is constantly on (power) and LED "D" turns on after a short while. This indicates that the SD card is working and the USRP2 booted successfully.

If the LEDs are correct and it is still not working, you should update gnuradio to the newest version. Maybe your version is not able to speak with the device correctly.

However, I think your problem is an issue with the USRP2 not booting correctly.

Regards,
Matthias
[currently in (rainy) Kyoto]

ps:
I think I found your problem after writing this: you have a filesystem on your SD card, because you use /dev/sdd1. You have to use /dev/sdd with the u2_flash_tool in order to correctly flash the card, the files must be written directly on the beginning of the card (and make sure that /dev/sdd is the correct device first, it will otherwise overwrite your boot sector or whatever...) If you used a new card, you definitely need to put both FPGA and firmware on the card.

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio