Re: Using RFNoC blocks for satellite systems

On 26/01/2024 17:07, Daniel Estévez wrote:
> Hi Yotam,
>
> As far as I know, the B200 doesn't support RFNOC. From
>
> https://www.ettus.com/sdr-software/rfnoc/
>
> "all USRP devices from the third-generation on (X300 Series, E300
> Series) are supported by RFNoC out-of-the-box".
>
> Best,
> Daniel.
This is the case, yes.  The FPGAs in the B2xx series aren't compatible
with the RFNOC toolchain for one, and aren't really
  big enough to support the RFNOC framework inside the FPGA.


>
> On 26/01/2024 21:04, יותם זיס wrote:
>> Hi everyone, I'm currently working on a bpsk modem for S-band
>> communication with the Tevel and TAUSAT satellites. I recently
>> started reading about RFNoc and it intrigued me for use in my project
>> since I own a USRP B200. Would love some advice on whether or not to
>> try this out and if so how to implement it correctly, thanks.
>>
>> Attached - a picture of my flowgraph, currently the uplink is
>> connected directly to the downlink but usually i use a lime mini for
>> transmission.
>