Re: How can I split a periodic signal?

James,

I find an easy approach is to write the signal out as alternating i/q
binary if it's not already. That can be read into audacity as stereo
(File -> Import -> Raw), edited and written back out as raw data without
header (File -> Export -> Export Multiple, and choose Raw Headerless).
Don't worry about audacity's sample rate because you're editing raw i/q
anyway. This allows editing down to the sample level.

Good luck!
Mike ab3ap

On 8/25/22 1:52 PM, James Wanga wrote:
> I'm receiving a phase modulated signal representing a periodic pulsed
> byte that looks something like this:
>
> -------------|-|||--||-------------|||--||||-------------|--||||-|-------------
>
> I'm trying to understand how I might split this signal roughly halfway
> between each pulse of activity so I can save each pulse as a separate IQ
> fil, bit like this:
>
> ------|-|||--||------
>
> -------|||--||||-------
>
> ------|--||||-|------
>
> The split does not have to be precise, it only needs to avoid bisecting
> any of the pulses. Here are some things I've tried.- Creating a custom
> block on the receiver that uses a timing interval. Unfortunately, the
> pulses aren't perfectly periodic so eventually this causes the split to
> drift.[...]