Thank you very much but I am using N210s and we already have the octoclock.
Can I ask a question about the frequency sink?
This block sometime doesn't work correctly, it can not detect the correct value in input and the result doesn't change if I disconnect it.
Other times, it works fine. I don't know if there is some settings that I have to check.
Thank you for you time.
Best regards,
Simona
Il giorno mer 27 nov 2019 alle ore 01:53 wu jo <john.wu.888@hotmail.com> ha scritto:
Hi Simona,I want to introduce you this 10Mhz ocxo which can connect to 2 usrp b210:
发件人: Discuss-gnuradio <discuss-gnuradio-bounces+john.wu.888=hotmail.com@gnu.org> 代表 Müller, Marcus (CEL) <mueller@kit.edu>
发送时间: 2019年10月9日 18:52
收件人: discuss-gnuradio@gnu.org <discuss-gnuradio@gnu.org>; ssibio2@gmail.com <ssibio2@gmail.com>
主题: Re: [Discuss-gnuradio] external source clock in USRPsHi Simona,
we'll need a bit of technical detail on these clock sources.
Also, chances are very much this is not something to do with GNU Radio
specifically, but only with the USRP, so usrp-users might be the better
mailing list.
Best regards,
Marcus
On Wed, 2019-10-09 at 10:25 +0100, Simona Sibio wrote:
> Hi all,
>
> I am writing to you regarding the external source clock using N200 with UBX-40.
> I need to connect the external source because I am working with two USRPs
> .
> I am working on GNU radio and I detect a different behavior of Rxs if I set the external source clock in USRP source sink module.
> If the source clock is external, the signal detected is inaccurate and very noisy.
>
> I tried with several source clock and I tried to implement the same system by python code but the outcome is the same .
> Could you help me?
> Maybe, there is some particular setting in the Rx that I don't know.
> Thank you for your time.
> Best Regards,
>
> Simona
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
No comments:
Post a Comment