Thank you very much for the reply. It seems to me that these functions are generic and not WBX specific. If I understood you correctly, WBX board does not have a fixed IF frequency. I had some experience with other SDR platforms where their RF boards have fixed IF frequencies at 30 MHz (Super-heterodyne receiver). This is not the case for WBX board?
Kind regards,
Yahia Tachwali
________________________________________
From: discuss-gnuradio-bounces+ytachwali=ou.edu@gnu.org [discuss-gnuradio-bounces+ytachwali=ou.edu@gnu.org] on behalf of Josh Blum [josh@ettus.com]
Sent: Monday, March 28, 2011 5:23 PM
To: discuss-gnuradio@gnu.org
Subject: Re: [Discuss-gnuradio] IF Frequency of WBX board
On 03/28/2011 02:18 PM, Tachwali, Yahia wrote:
> Hello Guys,
>
> What is the IF frequency of the WBX board? I could not find this in the WBX documentations. Any pointers? Thank you.
The IF frequency is generally the error in tuning between the target
center frequency and the actual center frequency. You can also manually
control the tuning, so the IF frequency could be anywhere between +/- 40
MHz (for example).
Theses links may be relevant to you:
See
http://www.ettus.com/uhd_docs/doxygen/html/structuhd_1_1tune__request__t.html
Also see
http://www.ettus.com/uhd_docs/doxygen/html/structuhd_1_1tune__result__t.html
-Josh
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio
No comments:
Post a Comment