Re: [Discuss-gnuradio] reg problem in running gnuradio 3.5 benchmark programs

Hi

I just want to list down the commands I used to run the benchmark programs.

./benchmark_tx.py -f 2.4G -r 1M --args "addr=192.168.10.2".  In addition I also gave the option [-A J1] to select the antenna to transmit. But I couldnt detect any transmitted signal from that node.

I also ran uhd_fft in receiver to graphically see if there is any signal getting received. but still couldnt see any.

uhd_fft.py -f 2.4G -s 1M --args "addr=192.168.10.2"


It will be of great help if someone can help me out with this.


Thanks