Thanks for the reply. I am using a MIMO cable between both URSP2s, so I thought that they sync automatically. I am not feeding a PPS to both devices, as I only need to run both synchronously, but I don't need to sync them to outside references.Aha. That feature is not implemented, but it is not far away. For the time being, the devices will need a shared PPS to sync. I believe that you can configure one of the USRP2 to lock reference over the mimo cable, but you will have to modify the python code a bit.
I see. But this can't be the (only) reason for my errors. When I select "don't sync" I don't get the warning abou the time stamps but I end up again with
OOUHD source block got error code 0x1
gr_block_executor: source <gr_block uhd multi_usrp source (1)> produced no output. We're marking it DONE.Where does this come from? I tried to input 1 PPS signals into both USRP2s but that also does not solve the problem. Any ideas?
Do you have any schedule for that development? Does this mean that the data (physically) streams from the slave devices throught the master device before going out through a single ethernet cable?When the MIMO cable support is completed, you will plug one device into the ethernet (this will be the master). And the slave device will lock its reference and sync its time over the MIMO cable. Both devices will communicate to the host via ethernet.
Regards,
Thomas
-- ****************************************************************** Dr. Thomas Hobiger Space-Time Measurement Project Space-Time Standards Group New Generation Network Research Center National Institute of Information and Communications Technology ------------------------------------------------------------------ 4-2-1 Nukui-Kitamachi, Koganei 184-8795 Tokyo Japan ------------------------------------------------------------------ email: hobiger@nict.go.jp phone: ++81-042-327-7561 fax: ++81-042-327-6664 ------------------------------------------------------------------ homepage (priv.): http://www.hobiger.org ******************************************************************
No comments:
Post a Comment