Re: [Discuss-gnuradio] "Failed to set frequency to ..." message in Spectrum scan

Well, the modification is for changing the code in such a way that it works on USRP2 since the original version is written for USRP. The rest is the same. Also it does't seem this is a programming bug since, it works for some time and then it crashes.

Rahman

On Fri, Apr 30, 2010 at 8:06 PM, Marcus D. Leech <mleech@ripnet.com> wrote:

On 04/30/2010 08:02 PM, Rahman Doost wrote:

hello everyone,

I 'm trying to collect some samples from my spectrum sensing code running on USRP2, which is a slightly revised version of 'usrp_spectrum_sense.py'. My problem is that after some time during the scan of some band, this message appears: "Failed to set frequency to ...". For instance I let the board to sweep my band 1000 times but after 100 or more scans (it's really variable) it stops its normal operation and can't lock on a frequency anymore.

I tested this with both WBX and XCVR front-ends in 400M and 2.4G. But the problem persists. Since I need to let the USRP2 work and collect samples for quite a long period, I really need to come up with a solution. I was wondering if someone has already encountered this problem and has solved it.

Rahman

 _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org http://lists.gnu.org/mailman/listinfo/discuss-gnuradio   

Does the non-slightly-revised version do the same thing?

--  Marcus Leech Principal Investigator Shirleys Bay Radio Astronomy Consortium http://www.sbrac.org 

_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
http://lists.gnu.org/mailman/listinfo/discuss-gnuradio